Questions and Answers

There are the most frequently asked questions about NC(Big See) produts

How to view NC IP camera, DVR or NVR remotely via a web browser? Answer: In order to setup NC(Big See) IP camera, DVR or NVR for remote viewing, please configure your router for port forwarding.

What is the maximum length that video cable can be run from NC(Big See) IP camera to NVR? Answer: The maximum length of cable must be less than 100 meters.

How to install IP, Analogue and mixed systems? Answer: Please download typical CCTV system setup.

What is the difference between free and commercial license of NCM 3.0?

How to connect my iPhone to NC(Big See) IP camera and NVR?

What is 4-in-1 camera series? Answer: 4-in-1 camera series which support HD-CVI, HD-TVI and AHD video formats.

What is the difference between HS and TP products? Answer: HS is middle-end IP cameras and NVRs, assembled in Shenzhen. TP is high-end IP cameras and NVRs, assembled in Taipei, Taiwan.

Can HS and TP systems be integrated? Answer: HS and TP systems use different CMS.

What is default IP address / ID / password for HS bullet and dome cameras: 192.168.1.10 / admin / the password space is empty.

What is default IP address / ID / password for HS PTZ cameras: 192.168.1.64/doc/page/preview.asp / admin / admin1234.

What is default IP address / ID / password for TP cameras: 192.168.0.200 / admin / pass.

What third-party products does NC(Big See)M 3.0 support? Answer: Please download NC(Big See)M 3.0 integrated equipment chart.

Does NVR HS have a backup function? Answer: Yes, it does. Please check the details in the manual (p.37-39).

What is default login and password for NC(Big See)-CMS (HS series): Login: super. Password field is empty.

What is default username and password for NC(Big See)M CMS (TP series): Username: admin. Password field is empty.

How to request NC(Big See)M5.0 license key. Please follow these steps.

Browser CCTV streaming is available only through Internet Explorer with installed and enabled Active X.